Home
PRODUCTS
High speed stranding machine
KY-650B high speed stranding machine
KY-650B high speed stranding machine
| Device model | KY-650B-L (R) |
| Purpose | Suitable for twisting bare stranded wire, tin plated wire, copper-clad aluminum wire, enameled wire, alloy wire, etc. 1+6 can be bundled instead of twisted. |
| Single wire diameter range | Ø0.16~Ø1.04mm |
| Twisted outer diameter range | Ø0.84~Ø3.2mm |
| Twisted cross-sectional area | 0.40～6mm² |
| Cable reel specifications | PND500-630 |
| Maximum speed of twisting bow | 2000RPM (design speed) |
| Normal operating speed | Below 1800RPM (the speed varies depending on the specifications of the twisted wire) |
| Cable laying (two methods) |
(1) Ø 30mm light rod bearing type cable, with accurate adjustment of cable width and spacing (2) Stepper motor+precision screw row ☑ |
| Twisted strand pitch | 11.6-100 mm (can be set according to customer requirements) |
| Direction of lay | The left and right direction can be freely selected, and the intelligent operation interface can switch freely |
| Main motor | 7.5KW AC motor+frequency converter |
| Bearing | The main shaft adopts Swedish SKF bearings, while the others use Japanese NSK bearings |
| Braking | Adopting electromagnetic brake, with internal and external wire breakage, automatically brakes when reaching meters |
| Tension control | Magnetic powder clutch controls the tension of the winding line, and the tension is automatically tracked and adjusted by the PLC program controller to maintain a constant tension |
| Wire reel fixation | Hand cranked top shaft type |
| Up and down axis | Electric hydraulic lifting |
| Length* Width* Height | 3000*1450*1650 |
